These are SANY Robotics’ published installations at overseas sites — not Frontline projects. The first New Zealand installation is planned for 2028, and the results below are SANY’s own figures.
“Driverless forklift” still sounds like a trade-show demo to most people. It isn’t. SANY Robotics has more than 2,200 automated vehicles working across ten-plus industries, and its launch material sets out what five of those installations do every day. Here they are, without the sales gloss.

1. Dense storage: stacking five high

The job. A logistics warehouse stacking loaded cages in dense blocks, with no racking.
Before. Operators could safely stack four high, and working at that height by eye was a risk.
After. Unmanned forklifts stack five high, carrying two-tonne loads to an operating height of eight metres. SANY reports a 100% stacking and unstacking success rate, and 25% more storage in the same building.
2. Aluminium ingots: round the clock

The job. Stacking aluminium ingots that come off the line at more than 300°C.
Before. A harsh place for people to work, with a constant collision risk.
After. 24-hour continuous unmanned operation, with heat shielding and temperature control built into the installation. SANY reports storage capacity up 40% and a payback period of about 18 months.
3. Chemicals: mixed product, no damage
The job. Storing and handling finished goods in both soft packs and hard packs — four types of product in the same store.
Before. Many product types made stock control hard, and soft packs were easily damaged in stacking.
After. Automated stacking tied into a warehouse management system, with a reported 0% cargo damage rate.
4. Chemical fibre: following the production line
The job. Moving material between process stages in an older factory with uneven floors.
Before. Many processes, many load carriers, and a floor that made manual handling risky.
After. Fully automated line transfer with every load tracked. SANY reports 100% material-management accuracy and vehicles that never lose their position, using navigation customised for the building.
5. Steel: a whole plant’s deliveries
The job. Warehousing and internal logistics across a steel works, planned and delivered as one system.
After. More than 11,000 delivery orders a day, with a 100% unmanned delivery rate.
What the five have in common
- Long hours on repeatable work. Every one of these sites runs multiple shifts on predictable routes. That’s where automation pays.
- A problem people shouldn’t be solving. Heat, height, fragile product or sheer volume.
- A whole system, not just a truck. Each installation includes site mapping, fleet scheduling and stock tracking, with a remote operator able to take over if a machine meets something unexpected.
SANY’s own rule of thumb from its installed sites is that one unmanned forklift does the work of a manual forklift plus two operators across a 24-hour operation.
Would it work for you?
Honestly, for many NZ sites the answer today is no. A single-shift warehouse with varied work is better served by a good manned forklift. But if you run two or three shifts on repeatable moves, it’s worth finding out early, because these projects are designed around the site and take time to plan.
Read how SANY Robotics works or book a site assessment and we’ll tell you straight whether it stacks up.