This is one of SANY’s published field cases from overseas sites — not a Frontline installation. We’re sharing it because fragile, high-volume product is a problem plenty of NZ operators know well.
Moving bottled product is a test of control, not strength. The loads are heavy, the pallets are stacked high, the floors are wet, and every jerky start or hard stop risks a pallet of broken glass. This case comes from several large brewing groups in China running SANY lithium forklifts through peak season.

The site
Bottling and distribution halls handling heavy crates at high frequency on wet floors. In peak season the forklifts work 20 hours a day.
The problem
- Poor fine control. The trucks couldn’t inch accurately enough when placing pallets.
- Jerky starts and stops, which is what breaks bottles and scrapes stacks.
- Slow response to the operator, which costs time on every single lift.
The result was product damage, and a real safety risk around broken glass.
What went in
SANY’s C-series high-voltage lithium forklifts, set up for the work:
- A fast-responding vehicle control unit, so the truck reacts to small inputs smoothly instead of lurching.
- Proportional hydraulic valves and a high-power hydraulic system, for precise lift and tilt under a full load.
- Twin-pallet forks, to move two pallets per trip.
What happened
SANY reports fine-control accuracy of under 0.5 cm when positioning loads, and the trucks covering 20-hour days on one-hour fast charges rather than battery swaps. Product damage dropped, and handling efficiency rose by about 20%.
What it means here
Swap “brewery” for a dairy plant, a bottling line, a winery or any site moving fragile palletised product, and the problem is the same. Smooth control saves product, and a charge that fits inside a break means one truck can cover a long day without a spare battery sitting in the corner.
The numbers above are SANY’s, from sites running these machines hard. Whether you’d see the same depends on your product, your floor and your shift pattern — which is exactly what we’d want to walk through with you first.
See the SANY range or tell us what you’re moving and we’ll spec the right truck and attachment together.