This is one of SANY’s published field cases from an overseas site — not a Frontline installation. We’re sharing it because corrosive product and salt air are everyday conditions for a lot of NZ operators.
Corrosion kills forklifts quietly. It gets into connectors, controllers and wiring looms long before anything looks wrong from the outside, and then the machine starts throwing faults nobody can trace. This case is from a fertiliser producer working with potassium chloride — about as hard on electrics as bulk product gets.

The site
A fertiliser plant at high altitude, handling strongly corrosive material in salt spray, dust, heat and humidity. The forklifts work 16 hours a day.
The problem
- Electrical components corroding and failing early, causing frequent stoppages.
- Machines prone to overheating in the heat and thin air.
- A heavy bill for maintenance labour and replacement parts.
What went in
SANY lithium forklifts specified for the environment:
- IP67 sealing on the motor, controller and battery, and on the high-voltage wiring harness, with waterproof connectors.
- Multi-layer anti-corrosion treatment.
- Water cooling for the drive system, so the truck doesn’t cook itself.
What happened
SANY reports operating costs down by about 30%, with core components lasting substantially longer than on the trucks they replaced.
How the sealing is tested
IP67 is easy to print on a brochure, so it’s worth knowing what’s behind it. SANY’s validation for this range includes:
- A one-hour underwater insulation test on the electric drive components.
- High-pressure washdown aimed directly into the electrical compartment.
- Whole-vehicle wading and immersion, to prove the seals hold in practice.
- Simulated rainstorm testing of the complete truck, which is rated IPX4.

What it means here
New Zealand has no shortage of corrosive sites: fertiliser stores, coastal yards and ports, salt works, and food plants that get hosed down every shift. If your current trucks keep throwing electrical faults that come and go, moisture and corrosion are the usual suspects.
Sealing won’t make a forklift maintenance-free, and a harsh site will still be harder on tyres, chains and hydraulics than a clean warehouse. But keeping the expensive electrical parts dry and sealed removes the most common cause of mystery breakdowns.
See the SANY range or tell us about your site and we’ll talk through what it needs.